The unpredictability of energy and water costs is transforming how food and beverage producers address sustainability, with an integrated approach proving the most effective driver of profitability.
Energy-intensive heating and cooling processes underpin food and beverage production, with water as a common medium for controlling temperatures. According to Ian Holland, EMEA sales manager at Armstrong Industrial, it, therefore, makes sense for optimization strategies to consider both energy and water when optimizing operations.
“Processes like refrigeration, heating, pasteurization, cooling, sterilization and cooking are among the most energy-intensive activities in food and beverage manufacturing,” he explained. “In most of these functions, water is equally integral to production, whether it forms part of the finished product or serves as the medium for heating, cooling and cleaning.”
Clean-in-place (CIP) systems, in particular, can consume significant volumes of water, often at elevated temperatures, adding to both water and energy costs.
“Any water wastage, therefore, is frequently a waste of energy at the same time,” he pointed out. “Conversely, any progress in optimizing either resource often helps conserve the other – with direct commercial benefits.”
He argued that an integrated approach to energy and water optimization can help food and beverage manufacturers reduce operating costs and improve resilience – while advancing their sustainability and profitability objectives.
Energy squeezing margins
In the United Kingdom, the scale of the sector’s energy challenge became particularly apparent during the energy crisis following Russia’s invasion of Ukraine in 2022. By the third quarter of 2022, according to the UK’s Food and Drink Federation (FDF), the energy component of UK food manufacturers’ input costs had rocketed to 22% – from just 12% in 2021 – leading almost half of producers to cut or pause their investment projects.
The European picture was similarly stark. Multinational financial group ING estimated in October 2022 that energy’s share of total costs for EU food manufacturers had risen from approximately 2% in 2019 to between 7.5% and 10%. Some manufacturers were reporting energy bills equivalent to as much as 30% of their total costs.
More recent evidence shows that this cost pressure has continued. In its second-quarter 2026 survey, the FDF reported that two-thirds of respondents had absorbed additional cost increases rather than passing them on to customers. The survey also found that 56% wanted government action to reduce energy costs, underlining the continuing concern about energy affordability.
“While these figures relate specifically to the UK and European markets, the underlying commercial challenge is relevant to food and beverage manufacturers worldwide,” said Holland. “Passing higher costs on to customers is not always possible in competitive markets – so manufacturers must find ways to control the costs they can influence.”
He argued that successful businesses will be those that are resilient to geopolitical forces beyond their control.
“The ability to be resilient against an unpredictable global backdrop means gaining more control over internal costs – to regain some of the predictability that is so vital to business planning,” he said.
Sustainability and profitability
The business case for efficiency extends beyond reducing electricity and fuel bills. It encompasses water consumption, carbon emissions, equipment reliability, maintenance and production continuity, he said. Large multinational food and beverage companies increasingly publish sustainability targets and report their environmental performance to shareholders and other stakeholders. These commitments are important for reputation and accountability, but Holland argued that environmental performance cannot be separated from financial performance.
“Reducing energy consumption can lower operating expenditure and carbon emissions simultaneously,” he said. “Improving water efficiency can reduce water procurement and treatment costs, while also lowering the energy needed to pump, heat, cool and treat that water.”
He advocated a stewardship approach that considers water throughout its lifecycle rather than concentrating solely on reducing consumption.
“Water stewardship is about looking at the life cycle of that water,” he explained. “If you don’t have enough water available, production is at risk and likely to be curtailed. Adequate water at the required cost and quality is vital to the resilience of your operation.”
That resilience also extends upstream to agriculture, he pointed out, where water availability affects the production of food ingredients. For manufacturers, responsible resource management is therefore both an operational priority and a supply-chain consideration.
Managed together
Treating energy and water as separate sustainability objectives can obscure important opportunities for improvement, he noted. While pumping water around a manufacturing plant consumes electricity, heating or cooling it requires additional energy. When hot water is discharged without recovering its residual heat, the plant may be losing both a valuable resource and the energy required to bring it to the appropriate temperature.
“Water and energy consumption within food and beverage manufacture are closely connected,” explained Holland. “CIP systems, pasteurization and sterilization are among the processes where this relationship deserves particular attention – as each may offer opportunities to reduce water consumption and recover heat.”
Holland suggests a hierarchy of action: first reduce consumption, then re-use resources where possible, and finally recycle them. Recycling can deliver additional benefits where the water retains useful thermal energy that would otherwise be lost.
“Heat recovery is an important example,” he pointed out. “Capturing energy from hot wastewater or other process streams before discharge can allow that heat to be returned to the production process or used elsewhere on site.”
Where to start
The practical starting point in most food and beverage manufacturing facilities, he argued, is to establish the current position (see sidebar), including energy and water consumption relative to production, waste streams, carbon emissions, and the performance of existing equipment. This data can then be judged against suitable benchmarks to identify improvement opportunities.
“The next step is to rank those opportunities according to their potential savings, implementation costs and expected returns,” he said. “Some changes may require little or no capital expenditure, while others will justify equipment upgrades or more extensive system redesign.”
Importantly, this approach allows manufacturers to move forward with incremental improvements until they can fund a major capital project. He cited the example of replacing a fixed-speed pump with a correctly specified variable-speed pump– which invariably reduces energy consumption where flow and demand fluctuate.
“Such changes can also generate useful performance data to inform subsequent decisions,” he said. “The benefits depend on the application, the existing system and appropriate engineering design.”
System optimization
The broad principle is to optimize the entire system rather than focusing exclusively on individual pieces of equipment.
“A common mistake is to assume that installing efficient individual components will automatically produce an efficient manufacturing operation,” said Holland. “However, two efficient components may not interact optimally when combined into a system. Instead, a plant requires that pumps, heat exchangers, refrigeration equipment and other production processes work together to achieve its full efficiency potential.”
Measure what matters
Finally, measuring the energy and water intensity of production helps to highlight the true value of both resources, he explained. While manufacturers have traditionally monitored production output, labor productivity and equipment uptime, they are increasingly also measuring the energy and water required to produce a unit of product.
“A brewery, for instance, will measure the energy and water consumed by the facility for every litre of beer it produces,” he said. “Similar intensity metrics can be applied across food and beverage manufacturing, allowing performance to be compared over time and against appropriate operational benchmarks.”
Holland concluded that the most successful operators will be those who treat sustainability performance and profitability as inseparable elements of the same objective.
IndiFoodBev — authentic, impactful and influential
An English-language food and beverage processing and packaging industry B2B platform in print and web, IndiFoodBev is in its third year of publication. It is said that the Indian food and beverage industries represent approximately US$ 900 billion in revenues which implies more than 20% of the country’s GDP. Eliminating the wastage on the farmside can help to deliver more protein to a higher number of the population apart from generating sizable exports. The savings in soil, seeds, water, fertilizer, energy and ultimately food and nutrition could be the most immense contribution that country is poised to make to the moderation of climate change.
To improve your marketing and grow sales to the food and beverage processing and packaging industry, talk to us. Our research and consulting company IppStar [www.ippstar.org] can assess your potential and addressable markets in light of the competition. We can discuss marketing, communication, and sales strategies for market entry and growth.
Suppliers and service providers with a strategy and budget for targeted marketing can discuss using our hybrid print, web, video, and social media channels to create brand recognition linked to market relevance. Our technical writers are ready to meet you and your customers for content.
The second largest producer of fruit and vegetables in the world is continuously expanding processing capacities and delivery systems with appropriate innovative technologies. We cover product and consumer trends, nutrition, processing, research, equipment and packaging from farm to thali. Get our 2025 media kit and recalibrate your role in this dynamic market. Enhance your visibility and relevance to existing markets and turn potential customers into conversations. Ask for a sample copy of our bi-monthly in print or our weekly IndiFoodBev eZine each Wednesday.
For editorial info@ippgroup.in — for advertisement ads1@ippgroup.in and for subscriptions subscription@ippgroup.in
Naresh Khanna – 10 February 2025
Subscribe Now








